冷拔無縫無縫鋼管在生產中也是持續地開展充分發揮呈現出來一般的實際作用的，不過冷拔無縫無縫鋼管在開展進行維護和保得住的完整過程中並並非一度風順的，因為如此或是是那麽的原因進行引起冷拔無縫無縫鋼管進行金星的要樣兒是進行比較多的，針對冷拔無縫無縫鋼管進行金星的後遺症是無法開展運用了，進行失敗了冷拔無縫無縫鋼管戛戛獨造的特點。這一期間即將開展酸洗了，這樣的話冷拔無縫無縫鋼管是什麽開展酸洗除鏽的呢?
Cold-drawn seamless steel pipe is also constantly playing a huge role in production, but the process of maintenance and maintenance of cold-drawn seamless steel pipe is not smooth, because of this or that reason, the phenomenon of cold-drawn seamless steel pipe rusting is more, for cold-drawn seamless steel pipe rusting. The result is that it can not be used and the original characteristics of cold-drawn seamless steel tube are lost. At this time, acid cleaning is needed. How do cold-drawn seamless steel tubes remove rust by acid cleaning?
冷拔無縫無縫鋼管及液化物在檸檬酸和亞硫酸正當中進行解散度有所區別。20℃時，每100g試件在10%的檸檬酸膠體溶液中可進行解散7.5g三液化二鐵，而在10%的亞硫酸膠體溶液中隻得進行解散0.98g三液化二鐵。在雷同熱度、粘滯性下，檸檬酸對鐵件的進行解散度不等亞硫酸7倍上述。因此在鋼材要樣兒除鏽更加多用檸檬酸。檸檬酸除鏽運行速度快、工作效率高、不形成氫脆、要樣兒情況好，在研製洗液時又比亞硫酸更為安全、經濟領域。
The solubility of cold-drawn seamless steel tube and oxide in hydrochloric acid and sulfuric acid is different. Ferric trioxide can be dissolved 7.5 g in 10% hydrochloric acid solution and 0.98 g in 10% sulfuric acid solution at 20 C. At the same temperature and concentration, the solubility of hydrochloric acid to iron parts is more than 7 times higher than that of sulfuric acid. Therefore, hydrochloric acid is often used to remove rust on steel surface. Hydrochloric acid has the advantages of fast rust removal, high efficiency, no hydrogen embrittlement and good surface condition. It is safer and more economical than sulfuric acid in the preparation of lotion.
用酸洗的解決辦法為害老工人身子保持健康，進行排放廢液會導致工業領域造成汙染，有必要"三廢"進行治理，酸洗後還很比較容易形成液化皮鏽層，在滿足相關條件時鋼材設備長時間透露在大氣中，會高速被破壞，人們正在需要能代替關於此種辦法的新生產工藝。在冷進行加工業務領域如：共管、拉絲、鎮壓、深拉延等生產線，具體要求磷化膜給予減摩進行滑溜使用性能，通常使用鋅係磷化，一是鋅係磷化膜皂化後逐漸形成進行滑溜性很好的硬脂酸鋅層，二是鋅係磷化進行操作熱度進行比較低，可在40、60或90℃具體條件下開展磷化采用相應辦法解決，磷化時段4～10min，偶爾甚至還會關於幾十分鍾相對即可，磷化膜量體重具體要求≥3g/m2便可。
The method of pickling endangers the health of workers. Discharging waste liquor will cause industrial pollution. It needs to be treated by "three wastes". It is easy to produce oxide rust layer after pickling. If steel equipment is exposed to air for a long time, it will be corroded quickly. People are looking for a new technology to replace this method. In cold processing industry, such as takeover, wire drawing, extrusion and deep drawing, phosphating film is required to provide antifriction and lubricity performance. Zinc phosphating is generally used. First, zinc stearate layer with good lubricity is formed after saponification of zinc phosphating film. Second, zinc phosphating operation temperature is relatively low, and it can be phosphated at 40, 60 or 90 C. After treatment, the phosphating time is 4-10 minutes, sometimes even tens of seconds, and the weight of the phosphating film is more than 3g/m2.
冷拔無縫無縫鋼管的酸洗要按照化學規律開展，不過酸洗進行比較困難間和閱曆，大家能夠依據自身的真實情況狀況開展較為順序的去挑選，除此之外當冷拔冷拔無縫無縫鋼管發生進行金星的期間使不得眼巴巴用胰子水和洗衣服液開展衝突，免得發生多種各式各樣的著名的產生相應作用!
The pickling of cold-drawn seamless steel pipe should be carried out according to chemical principle, but pickling takes time and experience. Everyone can choose it appropriately according to their own actual situation. In addition, when the cold-drawn seamless steel pipe rusts, don't rush to wash it with soap water and laundry liquid in order to avoid all kinds of disadvantage. Influence!
