碳鋼冷凝器是使用碳鋼（Q235）釀成，由需要設置、進行鼓勵係統、密封構件、筒體、受到或比賽設置、昂首闊步構件、各用處的管口等構成。碳鋼冷凝器的具體工作規律：有必要開展進行配料與影響的各種類型的電介質按成比例的配方法參加碳鋼冷凝器中，在準譜兒的熱度適用範圍內配以進行鼓勵係統的電力實際作用，讓原材料改變成主要目標物即有必要獲得的結果。進行鼓勵器：進行配料影響是碳鋼冷凝器的關鍵技術，進行鼓勵進行操作包含半流體的進行起伏、熱傳導和傳質。進行鼓勵器有低粘滯性進行鼓勵器與高粘滯性進行鼓勵器，槳式、進行開始渦輪機式、磁盤渦輪機式、推動向前發展式為低粘滯性進行鼓勵器；高粘滯性進行鼓勵器有螺帶式、螺旋形槳式、框式、錨式及我公司新式研發的刮壁式進行鼓勵器。
Workingprinciple of carbon steel reaction kettle:The need for mixing andreaction of many kinds of media according to the proportion of formula intocarbon steel reactor, within a certain range of temperature with stirringsystem of external force, into the object to get the product to make conversionof raw materials. Carbon steel reactor is madeof carbon steel (Q235), is composed of a driving device, a stirring system,sealing components, a cylinder, a heating or cooling device, a support member,by application of the nozzle and other components
Mixer: the mixed reaction isthe core technology of the carbon steel reactor www.gfanyingfu.com, which involves the flow, heattransfer and mass transfer of the fluid. Stirrer has low viscosity mixer withhigh viscosity mixer and paddle type, open type turbine, disk turbine type,push type mixer with low viscosity, high viscosity mixer with ribbon type,propeller type, box type, anchor type and my company the latest development ofwall scraping stirrer.
熱傳導方法：外置夾套、內置盤管為最合同的受到或比賽方法。受到方法分電受到、導電油進行集團受到、水蒸氣受到、遠紅增大熱等，有所區別的生產工藝具體條件、有所區別的熱源方法錄取有所區別的受到方法。
Heat transfer mode: externaljacket, built-in coil for the most commonly used heating or cooling methods.Heating method is divided into electric heating, heat conduction oilcirculation heating, steam heating, far infrared heating, etc., differentprocess conditions, different heat source mode selection of different heating methods.
密封方式：局部真空度高或壓強比較而言較高時為機械密封，通常狀況下用填料密封相對即可。
Seal form: high vacuum orhigh pressure or high pressure for the mechanical seal, the general situationwith packing seal can be.
進行安裝方式：進行置放於進行操作服務平台正當中用耳式支座；進行進行單機設備采用直來直去進行安裝於自由體操時即用昂首闊步式或腿式支座。不管哪類進行安裝方式都具體要求整體水平度。
Installation form: placed inthe operating platform which uses ear type bearings; as a stand-alone equipmentused directly installed on the ground when the support or leg support. Nomatter what type of installation is required for the level of.
