銲接無縫鋼管也稱焊管，是用謄寫鋼版或帶鋼經曆卷起有關成型後銲接釀成的無縫鋼管。銲接無縫鋼管製造工藝更為簡便，製造效率高，栽培品種規格多，設備資少，但通常極限抗拉強度不可企及無縫無縫鋼管。銲接無縫鋼管按焊縫的方式進行劃成直縫焊管和螺旋形焊管。
Welded steel pipe, also known as welded pipe, is a steel pipe made of steel plate or strip after coiling and forming. Welded steel pipe has the advantages of simple production process, high production efficiency, many varieties and specifications and less equipment, but its general strength is lower than that of seamless steel pipe. Welded steel pipe is divided into straight welded pipe and spiral welded pipe according to the form of weld.
銲接無縫鋼管使用的毛坯是謄寫鋼版或帶鋼，因其銲接生產工藝有所區別而進行劃成爐焊管、電弧焊（阻力焊）管和自動化電弧焊管。因其銲接方式的有所區別進行劃成直縫焊管和螺旋形焊管關於兩種。因其端部幾何形狀又進行劃成圓圈焊管和異型（方、扁等）焊管。焊管因其材料和用處有所區別而進行劃成如下多少栽培品種：
The billet used in welded steel pipe is steel plate or strip. It is divided into furnace welded pipe, electric welded pipe and automatic arc welded pipe because of different welding technology. Because of its different welding forms, it can be divided into straight welded pipe and spiral welded pipe. Because of its end shape, it can be divided into circular welded pipe and special-shaped (square, flat, etc.) welded pipe. Welded pipes can be divided into the following categories because of their different materials and uses:
GB/T3091-2001（低氣壓半流體輸氣用鍍鋅銲接無縫鋼管）。重點用於輸氣水、瓦斯、大氣、油和受到開水或水蒸氣等通常較低氣壓力半流體和其他用處管。其表示材料為：Q235A級鋼。
GB/T3091-2001 (Galvanized Welded Steel Pipe for Low Pressure Fluid Conveyance). Mainly used for conveying water, gas, air, oil, heating hot water or steam and other general low pressure fluids and other purpose pipes. Its representative material is Q235A grade steel.
GB/T14291-2006（礦用半流體輸氣銲接無縫鋼管）。重點用於礦業壓風、進行排泄、軸放瓦斯用直縫銲接無縫鋼管。其表示材料Q235A、B級鋼。GB/T14980-1994（低氣壓半流體輸氣用大有關直徑電弧焊無縫鋼管）。重點用於輸氣水、雨水、瓦斯、大氣、受到水蒸氣等低氣壓半流體和其他用處。其表示材料Q235A級鋼。
GB/T 14291-2006 (Welded Pipe for Mine Fluid Transport). Mainly used for mine air pressure, drainage, shaft gas drainage with straight seam welded steel pipe. Its representative material is grade Q235A and B steel. GB/T 14980-1994 (Large Diameter Welded Steel Pipe for Low Pressure Fluid Conveyance). It is mainly used for conveying low pressure fluids such as water, sewage, gas, air, heating steam and other purposes. Its representative material is grade Q235A steel.
GB/T12770-2002（機械整體結構用不鏽鋼銲接無縫鋼管）。重點用於機械、機動車輛、自動車、家具設計、酒店和飯館裝飾品以及其他機械構件與整體結構件。其表示材料0Cr13、1Cr17、00Cr19Ni11、1Cr18Ni9、0Cr18Ni11Nb等。
GB/T12770-2002 (stainless steel welded steel pipe for mechanical structure). Mainly used for machinery, automobiless, bicycles, furniture, Hotel and hotel decoration and other mechanical parts and structural parts. Its representative materials are 0Cr13, 1Cr17, 00Cr19Ni11, 1Cr18Ni9, 0Cr18Ni11Nb, etc.
GB/T12771-1991（半流體輸氣用不鏽鋼銲接無縫鋼管）。重點用於輸氣低氣壓破壞性電介質。表示材料為0Cr13、0Cr19Ni9、00Cr19Ni11、00Cr17、0Cr18Ni11Nb、0017Cr17Ni14Mo2等。
GB/T12771-1991 (stainless steel welded steel pipe for fluid transportation). Mainly used for conveying low-pressure corrosive media. The representative materials are 0Cr13, 0Cr19Ni9, 00Cr19Ni11, 00Cr17, 0Cr18Ni11Nb, 0017Cr17Ni14Mo2, etc.
另有，裝飾品用銲接不鏽無縫鋼管（GB/T 18705-2002），建築物裝飾品用不鏽鋼銲接管材（JG/T 3030-1995），低氣壓半流體輸氣用大有關直徑電弧焊無縫鋼管（GB/T 3091-2001），還有換熱鋪謀定計銲接無縫鋼管（YB4103-2000）。
In addition, stainless steel pipes for decoration (GB/T 18705-2002), stainless steel pipes for architectural decoration (JG/T 3030-1995), large diameter welded steel pipes for low pressure fluid transmission (GB/T 3091-2001), and welded steel pipes for heat exchangers (YB4103-2000).
直縫焊管製造工藝更為簡便，製造效率高，費用成本低，持續發展較快。螺旋形焊管的極限抗拉強度通常比直縫焊管高，能用較窄的毛坯生產管徑更加較大的焊管，還能夠用同樣地幅度的毛坯生產管徑有所區別的焊管。不過與雷同長度的直縫管比較起來，焊縫長度增添30~100%，並且生產運行速度較低。
Longitudinal welded pipe has the advantages of simple production process, high production efficiency, low cost and rapid development. The strength of spiral welded pipe is generally higher than that of straight welded pipe. It can produce welded pipe with bigger diameter with narrower blank, and welded pipe with different diameter can also be produced with blank of the same width. However, compared with the straight seam pipe of the same length, the length of the weld increases by 30-100%, and the production speed is lower.
因為這個原因，較飲啜徑的焊管大都使用直縫焊，花木徑焊管則大半使用螺旋形焊。
Therefore, most of the smaller diameter welded pipes are welded by straight seam welding, while the larger diameter welded pipes are mostly welded by spiral welding.
進行補語：焊管是用帶鋼銲接的，因此在戛戛獨造它的所處位置沒無縫管高。
Supplementary: Welded pipe is welded with strip steel, so it is not as high as seamless pipe in its original position.
焊管阿彌陀佛進行補語：
Welded pipe type supplement:
1.普通碳素鋼電纜套管（GB3640-88）是工業領域與私房建築物、進行安裝機器設備等電動進行安裝工程頂用於維護電纜的無縫鋼管。
1. Common Carbon Steel Wire Bushing (GB3640-88) is a steel pipe used to protect electric wires in industrial and civil buildings, installation machinery and equipment and other electrical installation projects.
2.直縫電弧焊無縫鋼管（YB242-63）是焊縫與無縫鋼管走向平行線的無縫鋼管。一般情況下進行劃成米千克秒電弧焊無縫鋼管、電弧焊薄壁管、進行悠蕩器比賽油管等等。
2. Longitudinal welded steel pipe (YB242-63) is a steel pipe with longitudinal parallel weld and steel pipe. Usually it is divided into metric welded steel pipe, welded thin-walled pipe, transformer cooling oil pipe and so on.
3.持續承壓半流體輸氣用螺旋形縫埋弧焊無縫鋼管（SY5036-83）職是之故熱軋鋼帶卷作管坯，常常溫螺旋形有關成型，用雙麵埋弧焊法銲接，可用於持續承壓半流體輸氣的螺旋形縫無縫鋼管。無縫鋼管持續承壓實際能力強，銲接使用性能好，經曆多種從嚴的更加科學進行檢查和進行測試，采用安全且可靠。無縫鋼管標準大，輸氣工作效率高，並可厲行節約鋪砌線坯子的進行股本。重點用於輸氣原油、自然氣的線坯子。
3. Spiral submerged arc welded pipe (SY5036-83) for pressure fluid transportation is a kind of spiral welded pipe, which is made of hot rolled steel strip and spirally formed at normal temperature. It is welded by double-sided submerged arc welding and used for pressure fluid transportation. Steel pipe has strong pressure bearing capacity and good welding performance. It is safe and reliable to use after various strict scientific tests and tests. The steel pipe has large diameter, high conveying efficiency and saves investment in laying pipelines. It is mainly used for pipelines to transport oil and natural gas.
4.持續承壓半流體輸氣用螺旋形縫一再焊無縫鋼管（SY5038-83）職是之故熱軋鋼帶卷作管坯，常常溫螺旋形有關成型，使用一再進行溝通焊法銲接的，可用於持續承壓半流體輸氣的螺旋形縫一再焊無縫鋼管。無縫鋼管持續承壓實際能力強，塑性變形好，更加方便銲接和進行加工有關成型；經曆多種從嚴和更加科學進行檢查和進行測試，采用安全且可靠，無縫鋼管標準大，輸氣工作效率高，並可節約鋪砌線坯子的進行股本。重點用於鋪砌輸氣原油、自然氣等的線坯子。
4. The SY5038-83 spiral seam high frequency welded steel pipe for pressure fluid transportation is a high frequency spiral seam high frequency welded steel pipe for pressure fluid transportation, which is formed by hot rolled steel strip coil and is welded by high frequency lap welding at regular temperature. The steel pipe has strong bearing capacity, good plasticity, and is easy to be welded and processed. Through various strict and scientific tests and tests, it is safe and reliable to use, large diameter of steel pipe, high transportation efficiency, and can save the investment of laying pipelines. It is mainly used for laying pipelines for oil and natural gas transportation.
5.通常低氣壓半流體輸氣用螺旋形縫埋弧焊無縫鋼管（SY5037-83）職是之故熱軋鋼帶卷作管坯，常常溫螺旋形有關成型，使用雙麵自動化埋弧焊或單麵焊法紀成的可用於水、瓦斯、大氣和水蒸氣等通常低氣壓半流體輸氣用埋弧焊無縫鋼管。
5. Spiral submerged arc welded steel pipes (SY5037-83) for low-pressure fluid transportation are usually made of hot-rolled steel strip coils and spirally formed at normal temperature. They are used for water, gas, air, steam and other general low-pressure fluid transportation by double-sided automatic submerged arc welding or single-sided welding.
6.通常低氣壓半流體輸氣用螺旋形縫一再焊無縫鋼管（SY5039-83）職是之故熱軋鋼帶卷作管坯，常常溫螺旋形有關成型，使用一再進行溝通焊法銲接可用於通常低氣壓半流體輸氣用螺旋形縫一再焊無縫鋼管。
6. Spiral seam high frequency welded steel pipes (SY5039-83) for low-pressure fluid transportation are usually formed by hot-rolled steel strip coils and spirally formed at normal temperature. High frequency lap welding method is used to weld spiral seam high frequency welded steel pipes for general low-pressure fluid transportation.
7．樁用螺旋形焊縫無縫鋼管（SY5040-83）職是之故熱軋鋼帶卷作管坯，常常溫螺旋形有關成型，使用雙麵埋弧銲接或一再銲接釀成的，可用於防患未然建築物整體結構、渡輪碼頭、鐵路橋梁等現有基礎樁
7. Spiral welded steel pipe for piles (SY5040-83) is made of hot-rolled steel strip coil as billet, spirally formed at normal temperature, double-sided submerged arc welding or high frequency welding. It is used in civil building structures, wharfs, bridges and other foundation piles.
按用處分門別類
Classification by use
又進行劃成通常焊管、鍍鋅焊管、吹氧焊管、電纜套管、米千克秒焊管、托輥管、深井泵管、機動車輛用管、進行悠蕩器管、電弧焊薄壁管、電弧焊異型管和螺旋形焊管。
It is also divided into general welded pipe, galvanized welded pipe, oxygen blowing welded pipe, wire sleeve, metric welded pipe, idler pipe, deep well pump pipe, automobiles pipe, transformer pipe, welded thin-walled pipe, welded special-shaped pipe and spiral welded pipe.
通常焊管：通常焊需要來輸氣低氣壓半流體。用Q195A、Q215A、Q235A鋼製造。也可使用需要銲接的其他軟鋼製造。無縫鋼管要開展水壓、躬身行禮、壓扁等開展實驗，對要樣兒質量有準譜兒具體要求，一般情況下寄遞長度為4-10m，常具體要求定尺（或倍尺）寄遞。焊管的規格用有名無實標準表明（螺絲帽或英尺）有名無實標準與真實情況有所區別，焊管按規
General welded pipe: General welded pipe is used to transport low-pressure fluid. Made of Q195A, Q215A and Q235A steel. It can also be made of other soft steels which are easy to weld. In order to carry out hydraulic, bending and flattening experiments on steel pipes, there are certain requirements for surface quality. Usually the delivery length is 4-10m, and the delivery of steel pipes is usually required to be of fixed size (or double size). The specification of welded pipe is expressed by nominal caliber (millimeter or inch). The nominal caliber is different from the actual one. The welded pipe is in accordance with the regulations.
